Aluminum Extrusion Information & Specs.

ALLOYS

6061 Alloy

Useful when additional strength or better machining is a consideration. There are configuration limitations. 6061 is not recommended for critical finishes

6063 Alloy

The most popular all purpose extrusion alloy. Recommended when surface finish is critical or when material is to be anodized. More intricate shapes are available in this alloy. It machines and forms well.

6005, 6351 Alloys also available

Return to Top of Page

QQ-A200/8: 6061 solid shapes
QQ-A-200/8 TYPE II: 6061 hollow shapes
QQ-A-200/9: 6063 solid shapes
QQ-A-200/9 TYPE II: 6063 hollow shapes
QQ-A-200/16: 6061 structural shapes

** The above Specifications have been withdrawn by the Government,
and replaced by the ASTM Specifications.

ASTM B-221: 6061 & 6063 shapes, tubes

ASTM B-429: 6061 & 6063 pipes, tubes

Return to Top of Page

T1: Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition. Applies to products that are not cold worked after cooling from an elevated temperature shaping process, or in which the effect of cold work in flattening or straightening may not be recognized in mechanical property limits.

T4: Solution heat-treated and naturally aged to a substantially stable condition. Applies to products that are not cold worked after solution heat-treatment, or in which the effect of cold work in flattening or straightening may not be recognized in mechanical property limits.

T5: Cooled from an elevated temperature process and then artificially aged. Applies to products that are not cold worked after cooling from an elevated temperature shaping process, or in which the effect of cold work in flattening or straightening may not be recognized in mechanical property limits.

T6: Solution heat-treated and then artificially aged. Applies to products that are not cold worked after solution heat-treatment, or in which the effect of cold work in flattening or straightening recognized in mechanical property limits.

H111 & H112: (wroght products only) Applies to products that have their strength increased by strain-hardening, with or without supplementary thermal treatments to produce some reduction in strength.

Return to Top of Page

Nominally we can extrude hollow shapes to 8" circle size, and solids to 12" circle size.
Please inquire.

click here for additional circle size information

Return to Top of Page

Cutting tolerance: -0 / +.250 12' to 30' lengths
Cut lengths: 6' - 53'

Return to Top of Page

6063 (Solid): .050" To .142" (Depending on Circle Size)

6063 (Hollow): .056"To .188" (Depending on Circle Size)

6061 Increase by 15%

Click here for more Wall Thickness information

Return to Top of Page

Return to Top of Page

Finishing Capabilities

Anodize lengths to 24' 2". (Heavy Etch Capabilities)

Powder Coat to 23 linear feet

Return to Top of Page